UTM-1004D 10KN High & Low Temperature Universal Testing Machine

Capacity :

10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN ( can select double capacities reparation)

Temperature Range:

0, -20, -40, -60, -70℃~150℃

Display:

Computer display mode

Force Resolution:

1/500,000

Force Accuracy :

≤±0.3%

Stroke Resolution:

0.005mm

Control Mode:

Tensile tester all computerized operation mode

Temp. Control:

PID automatic calculation, stable error

Display Accuracy:

0.1℃

Temp. Accuracy:

±1℃

Circulation System:

Fan force circulation system

Heating System:

stainless steel heat radiation type of heater

Cooling System:

Fan cooling type, high-efficiency compressor, environmental protection cooling medium

Protection Device:

Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device

Chamber Material:

SUS#304 stainless steel

Test Stroke:

1300mm (after removing chamber, stand-alone operation and use tensile machine)

Test Width:

720mm (after removing chamber, stand-alone operation and use tensile machine)

Test Speed:

0.5~500mm/min, can set by computer, with up & down fast adjustment button of grips

Force Unit Switch:

Kgf, N, Ibf, g, ton, Mpa

Stop Mode:

Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function

Machine Dimension:

110×160×220cm(W×D×H)

Machine Drive :

Servo motor drive, synchronous wheel and precision ball screw drive

Power :

400W

Machine Weight:

Approx 420kg

Power Supply:

220V 50/60HZ 30A

Standard Device :

Extension pole of grips, heat abstractor, 1 set of grips, computer software, USB computer connection wires

Optional :

Personal computer